Port Forwarding (TUT) Noob Detalied!
Ok,in this tut i will show you how to PortForward your IP adress.
Lets get started...
First open : http://portforward.com
Then scroll down and find your router.If you cant find it,then press
"Ctrl+f " and type your ruoter.In my case is TP-Link.
Then click on it.
After that,just click Skip...
Then,scroll a little and you will see "1st SMTP Server" , and click that...
Then it will show you,how to port forward exactly for your ROUTER,but
now i will show for mine :D
Ok,now click "start",then "run",and type cmd!
Now black windows will appear,and you must type "ipconfig",and it will show you some ip adresse’s,you must copy ip from "Default Gateway"
After that,open firefox or what ever you have,and type your "Default Gateway" ip.
When you type, it will show you small window to type username and password.Usually password and username are same "admin"..so you type like that.
Then you click "Advance setup"
next,click "NAT" , and click "add"
And than,select "Custome server" , type "CyberGate".
Type your Ip adress from DOS,next type port you want,in my case is 82.
Select Protocol,use both of them,and FINALY click Save/Apply! ;)
And now LAST step.
Open http://canyouseeme.org and type your port (mine is 82) and click "Check"!!
And it will show you just like this:
Success: I can see your service on **.**.**.**:*** on port (82)
Your ISP is not blocking port 82
If its like that,then you are DONE!! congratulations!
But if you have some error,it would look like this:
Error: I could not see your service on **.**.**.**:** on port (82)
Reason: Connection timed out.
